Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Arlington
If your electric gate has stopped mid-cycle, reverses for no reason, or won’t respond to the remote, we can help. Arlington Gate Service works only on gates, and electric gate repair is our core service, not a side job we hand off. We answer 24/7 at (855) 349-3550, with fast dispatch from 7am to 7pm, Sunday through Friday.
Arlington is a tight, densely built place, and that shapes the work. Most of the residential lots here are small and near-zero-setback, so a driveway gate often sits inches from a neighbor’s fence or a protected mature oak. When a hinge post fails, the repair can turn into a fencing-law question as much as a hardware one, and we plan for that. Our technicians have up to 10 years of experience, and we diagnose the actual brand on your property rather than applying a one-size-fits-all approach. Call (855) 349-3550 for a free estimate.
Why Arlington Homeowners Call Arlington Gate Service for Electric Gate Repair
We’re gate specialists, not generalists. General contractors tend to subcontract gate work out; we do it ourselves, from the motor to the control board. That focus means we recognize the system on your property and know the parts it takes, whether you’re running a light-duty residential operator or a heavy-duty commercial one.
We service nine major gate operator brands, including residential-grade systems like Mighty Mule and Ghost Controls and commercial-grade operators like FAAC, BFT, DoorKing, and Viking. Because we diagnose the brand on-site instead of guessing, we get the fault right the first time more often than a multi-trade shop splitting attention across dozens of services.
Neighborhoods like Ballston, Cherrydale, and the close-in streets near the East Falls Church Metro are full of older brick Colonials and Capes from the 1920s through the 1950s, mixed with newer infill townhomes. Gates there are typically wood privacy, vinyl, or wrought-iron and aluminum drive gates hung on fence lines that have been replaced more than once. We recognize that mix.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Electric Gate Motor in Arlington
Electric Gate Motor work in Arlington usually starts with the same question: is the motor itself failing, or is the gate fighting it? A gate that sags on a heaved hinge post makes a healthy motor look dead, so we test the operator and the gate’s movement together before quoting any replacement motor.
Most Arlington drive gates run on swing or slide operators from brands like FAAC, BFT, Linear, or Viking. When a motor does fail, it’s often after a long spell of hard work against a binding gate or a post that has shifted with the seasons. A motor swap on a sound gate is one thing; a new motor hung on a worn or heaving post is money wasted, so we check the structure first.
Motor Testing Before Replacement
Before we recommend a new motor, we test the operator under load, trace the power feed, and check the drive mechanism for binding. If the motor is fine but the gate is straining it, we say so and quote the structural fix instead.
When the Motor Is the Problem
Some operators do reach the end of their life, especially older models with parts that are no longer made. When that happens, we walk you through the retrofit options and what a modern replacement involves.
Gate Access Control in Arlington
Gate Access Control in Arlington covers the parts you actually touch: the keypad, the remote, the safety sensors, and the control board that ties them together. When owners tell us the remote works one day and not the next, or the keypad code stops opening the gate, the fault is frequently in the access hardware or a corroded control board rather than the motor.
Board failures are common on older operators here. Discontinued LiftMaster and Linear boards are particularly prone to failure after humid summers and power surges, which can leave a gate reversing erratically or refusing to move at all. Modern control boards bring better diagnostics and cleaner safety logic, and in many cases a board retrofit saves the whole operator.
Residential and commercial systems both land on our schedule. Homeowners with a single drive gate and property managers with a multi-unit entry gate get the same diagnostic approach.
Keypads, Remotes, and Sensors
Access hardware takes constant wear and weather. We repair or replace keypads and remotes, align and replace safety photocells, and make sure loop detectors are reading correctly so the gate behaves predictably.
Control Board Retrofits
When the board is the problem, a retrofit can bring a legacy operator up to modern entrapment protection standards. We weigh that against the cost of a full replacement and tell you plainly which makes more sense.
Trusted Brands We Service in Arlington
We work on the brands your gate most likely carries: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That spread runs from residential-grade openers to heavy-duty commercial operators, so the diagnostic approach fits your actual system rather than a generic checklist. We don’t claim to stock parts on our side; we identify the fault, source what’s needed, and get you a clear path to repair. Because we recognize your brand on arrival, turnaround stays tight.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Arlington Homes
- Obsolete control boards. Older LiftMaster and Linear boards fail from humidity and power surges, causing erratic operation and forcing retrofits. A modern board often restores reliable cycling.
- Heaving and rotting hinge posts. Arlington’s freeze-thaw cycles and clay soils shift posts, so gates sag and strain the operator into false safety reversals. We check the post before touching the motor.
- Shared and back-to-back fence lines. Ambiguity over whose post is failing delays repairs, and sometimes a boundary survey has to come first. We help you sort out responsibility before we re-set anything.
- Wind-racked vinyl and aluminum gates. Summer thunderstorms bend tracks and misalign rack and pinion on slide gates, which then bind and burn out motors. Straightening the gate comes before motor work.
Pricing for Electric Gate Repair in Arlington, VA
Electric gate repair pricing here follows the job, not a flat rate. The written estimate sets the final price, and it’s quoted and agreed before any work starts, so there’s no surprise on the invoice. A typical motor replacement on a residential swing gate in Arlington runs somewhere in the $450 – $1,200 range depending on the operator and whether the gate needs aligning. An access control repair, like a keypad, remote, or sensor issue, often lands lower, in the $150 – $400 range. Control board retrofits and hinge post re-setting sit between those figures, and post work near a shared fence or a protected tree can add a step. We give you the free estimate up front so you know what you’re paying for.
We Also Serve Cities Near Arlington
Our electric gate repair team covers the towns around Arlington too, including Bailey’s Crossroads, Tysons, Wakefield, and Kings Park. If you’re just outside the county line, we can still get your gate diagnosed and fixed. Reach out and we’ll let you know how we can help across Arlington and the surrounding area.
Serving Arlington, VA – Our Local Coverage Area
We serve Arlington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Arlington
Yes, random reversing is very often a safety photocell that’s misaligned or an outdated loop detector failing to read correctly. We test both, along with the control board, because a corroded board on a legacy operator can produce the same symptom. Call (855) 349-3550 for a free estimate.
You can usually retrofit a modern operator onto a sound gate panel, and for many Arlington properties that’s the cheaper answer. The catch is the post and footing: if the hinge post has heaved or the footing is compromised, it has to be corrected before any new operator will run reliably. We check the structure first, then recommend retrofit or replacement.
FAAC, BFT, Linear, Viking, LiftMaster, and DoorKing systems are all common in Arlington, and yes, we service them. We work on nine major brands spanning residential to commercial grade, so the odds are good we know your operator. Call (855) 349-3550 to schedule a diagnostic.
Responsibility on a shared or back-to-back fence line depends on where the boundary sits and what the fence agreement says, so we help you identify the post’s owner before re-setting anything. On older Arlington lots this frequently turns into a boundary question, and a survey may be needed first. We’ll walk you through what the repair requires either way.
Freeze-thaw cycles heave the hinge posts, which sags the gate and makes the motor work harder than it should, eventually causing false reversals or motor strain. The gate’s structure has to be right before the motor will behave, so we inspect the posts alongside the operator. Call (855) 349-3550 for a free estimate.
Whether your electric gate needs a motor, a control board, or a re-set post, we can diagnose it and get you a clear answer. Call (855) 349-3550 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Head to our electric gate repair team for the full picture of what we do.
Written by the team at Arlington Gate Service.