Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across George Mason
A gate that won’t open is a problem. A gate that won’t open because the replacement panel you just ordered fails HOA review is a bigger one. In George Mason, gate repair has two sides: the mechanical work and the design review that comes with it. We work both sides, which is why homeowners, property managers, and HOA boards in George Mason call us first.
Our technicians have up to 10 years of experience. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 349-3550 for a free estimate.
Why George Mason Homeowners Call Arlington Gate Service for Gate Repair
Most of George Mason sits inside planned subdivisions, and that shapes how a gate job runs here. Before we spec a part or quote a weld, we ask what the architectural review board has on file. That step saves our George Mason customers from ordering a gate that meets code but fails review.
We’re a gate-only shop. Not a fence company that also does gates, not a handyman shop with a gate line item. Every call we take is about a gate, which means the diagnostic is sharper and the parts knowledge is deeper. When your operator has a BFT control board or a Linear receiver acting up, we’ve worked on that system before.
Our technicians have up to 10 years of experience, and they know the difference between a sagging gate that needs hinge work and one that needs a post footing correction. Those are different jobs. Treating one as the other is why gates in George Mason sometimes get “fixed” twice in a season.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Iron Gate Repair in George Mason
Iron Gate Repair in George Mason usually starts with the hinge post, not the gate panel. The ornamental aluminum and steel gates in the brick-front colonial and townhome clusters here date to the 1980s through the 2000s, and decades of Virginia freeze-thaw cycles have heaved the post footing on a lot of them. The gate droops, the hinge binds, and eventually the operator arm drags or strips. A typical iron gate repair in George Mason runs $250 to $650 for hinge and post work, $400 to $900 for realignment, and $150 to $400 for lock and latch repair. Weld and rust repair on original ornamental sections runs $200 to $550. The written estimate sets the final price, and we quote before any work starts.
Fastener and Hinge Binding
The most common iron gate call we get in George Mason is binding at the hinge post. The gate has sagged a half-inch to an inch, the hinge no longer swings free, and the gate has to be lifted to latch. That’s a post footing problem wearing a hinge costume. We check the footing first.
Rust on Ornamental Steel
Humid summers and winter freeze-thaw cycles crack paint at weld seams and fastener heads, and rust starts there. Small rust spots are a coating and prep job. Deep rust eats the wall thickness of the section, and at that point it’s a replacement question, not a repair. We’ll tell you which one you’re looking at before we quote.
Sliding Gate Repair in George Mason
Sliding Gate Repair in George Mason often means a community-entry gate with a rack and pinion that’s drifted out of alignment, leaving residents stuck at the keypad. When the gate slides past its stops, the rack teeth wear unevenly, and eventually the operator motor runs but the gate doesn’t move. We check the rack and pinion first, then the loop detector, then the operator. A typical slide gate realignment in George Mason runs $300 to $700. Rack and pinion replacement runs $400 to $850. Loop detector replacement runs $250 to $500. Replacement of the operator motor itself depends on the unit, and we quote it in writing before anything is ordered.
Rack and Pinion Wear
Rack gears on a slide gate wear at the drive end first, so the gate starts skipping at one position and works fine everywhere else. That gives you a false sense the gate is mostly okay. The skip gets worse within a season, and a stripped rack section stops the gate entirely.
Entrapment Protection for Automated Gates
Automatic gates in George Mason should have functioning entrapment protection. The operator’s safety sensors and reversing logic aren’t optional hardware on a moving gate, especially on a shared entry where kids and pedestrians cross the path. We test both directions and confirm the sensors trigger a reverse before we sign off.
Trusted Brands We Service in George Mason
We work on the operators you actually have. That includes BFT, Linear, Viking, and Ghost Controls, along with LiftMaster, FAAC, DoorKing, Elite, and Mighty Mule. We don’t stock parts on a truck. Instead, we diagnose the brand on site, identify the failed component, and source what’s needed for the make and model. For a BFT operator that means working the control board logic rather than swapping the whole unit. For a Linear or Ghost Controls residential system, it means checking the receiver and safety sensors before touching the motor. For a Viking or DoorKing commercial-grade unit, it means confirming the access hardware and loop detector before we recommend a control board. No parts inventory to search, no guesswork.
Common Gate Repair Problems We See in George Mason Homes
- Sagging ornamental steel driveway gates in 1980s – 2000s subdivisions. Freeze-thaw heaves the post footing and binds the hinge post, so the gate sags even after the hinges have been tightened. The footing is the fix, not the hinge.
- Community-entry slide gates with drifting rack and pinion or loop detectors. The gate drifts out of alignment and residents get stranded at the keypad. The loop detector or rack gear is usually the cause, not the operator motor.
- Replacement panels rejected at HOA architectural review. A panel ordered to the wrong color, height, or finish fails review after it’s installed. Getting the specs documented before ordering prevents that cost.
- Automated gate openers stressed by summer thunderstorms and heavy snow loads. Northern Virginia’s storms load the operator arm and latch mechanism, and a weakened drive system fails under that stress. Testing the operator under load tells us if the motor is compromised.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in George Mason, VA
Here’s what gate work typically runs in George Mason. Iron gate repair, including hinge and post work, runs $250 to $650. Realignment runs $400 to $900. Weld and rust repair runs $200 to $550. Sliding gate repair, including rack and pinion and loop detector work, runs $300 to $850. Lock and latch repair runs $150 to $400. What moves the number is post footing condition, whether the gate needs to be removed for welding, and whether the part has to be sourced for the operator brand. These are typical ranges, not exact quotes. Your written estimate sets the final price, and we quote and agree it before any work begins. Call (855) 349-3550 for a free estimate on your George Mason gate.
We Also Serve Cities Near George Mason
We serve George Mason along with the surrounding communities of Long Branch, Burke Centre, Wakefield, and Braddock. If you’re just outside the George Mason line, our gate repair team covers the same service area and the same HOA approval process. Book a free estimate and we’ll confirm what your community requires. Call (855) 349-3550.
Serving George Mason, VA – Our Local Coverage Area
We serve George Mason and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in George Mason
Yes, for a replacement or a visible change to color, height, or style, you almost always do. George Mason is an unincorporated Fairfax County community governed largely by planned-subdivision HOAs rather than a single municipal code office, so a replacement that passes county review can still be rejected at architectural review for a color, height, or picket-spacing mismatch. Documentation comes first: exact color, height, finish, and style, submitted before the gate is ordered. Call (855) 349-3550 to talk through what your board will need.
That’s still your HOA or management company’s call, and we coordinate with them directly. Shared entry gates are community property, so the board authorizes the work and we handle the diagnostic and the fix. On a shared slide gate, we check rack and pinion and loop detector before recommending a LiftMaster or DoorKing operator adjustment. Call (855) 349-3550 and we’ll walk your board through what’s failing.
Because the hinges were never the problem. In George Mason’s 1980s – 2000s subdivisions, freeze-thaw cycles heave the post footing, and the gate rides down and out. Tightening the hinges masks it for a few weeks, then the sag comes back. A proper inspection checks the post footing before anything else. Call (855) 349-3550 for a free estimate on the real fix.
Automatic gates should have functioning entrapment protection, and we treat it as a safety requirement, not an upgrade. A moving gate without working safety sensors or reversing logic is a crush hazard, especially on a shared entry where people cross the path. We test both directions and confirm the sensors trigger a reverse. Call (855) 349-3550 to schedule a check.
Yes, usually. Swollen boards, a failed hinge, or a sagging post can be corrected without replacing the full gate. Northern Virginia’s humid summers swell wood, and freeze-thaw loosens the post over time. We assess the gate, the posts, and the hardware before quoting, and the written estimate sets the final price. Call (855) 349-3550 for a free estimate.
Getting Your George Mason Gate Fixed
Whether you need a sagging iron gate corrected, a sliding gate realigned, or a replacement panel that will pass HOA architectural review, we can help. We also serve the neighboring communities of Long Branch, Burke Centre, Wakefield, and Braddock through our George Mason coverage area. Call (855) 349-3550. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Written by the team at Arlington Gate Service.