Gate Installation in Arlington - Free Estimate, One Written Price

Trusted Gate Installation in Arlington

A new gate is a measured, built and scheduled job, and in Arlington it usually runs $3,200-$9,500 for a complete driveway system depending on width, material and operator. We install manual and automated gates for homeowners, HOAs and small businesses, and we work on the brand of operator already on your property rather than applying a one-size-fits-all approach. Our technicians have up to 10 years of experience, and we handle both repair and new installation, so you never have to source a second vendor halfway through a replacement. If your gate has failed, call (855) 349-3550. We answer 24/7, and same-day service is available for repair calls. For a new gate, we’ll come out, measure, and give you a written price before anything is ordered.

Call (855) 349-3550

Automatic Gate Installation

Automatic Gate Installation means fitting a gate with a powered operator, safety sensors and the access controls you need, so the gate opens without anyone leaving the car. You need it when a manual gate has become a daily hassle, when a driveway is steep or wide enough that swinging a gate by hand is awkward, or when you want a property’s entry tracked rather than left open. We install systems for residential driveways and for multi-unit and commercial properties in Arlington, and we choose the operator to match the gate’s weight and how often it runs, not the other way around. Brand range runs from Mighty Mule and Ghost Controls on light residential swings to FAAC and BFT on heavier arms and sliders. Because this work is measured and scheduled, we don’t promise same-day installation; we promise a free on-site measure and a written price you agree to before work starts.

Matching the Operator to the Gate

A heavy ornamental leaf and a light aluminum panel need very different arms. We weigh and check the hinge geometry first, because an undersized operator wears out fast and an oversized one is money spent for nothing.

Safety Edges and Access Hardware

Every automated gate we install gets safety edges, photocells and a control setup that stops the gate if something is in the way. We also wire the keypads, remotes and entry devices so the whole system is ready to use on day one.

Gate Installation Services

Gate Installation Services cover the full job: measuring, setting posts to proper footing depth, hanging the gate, fitting hardware and commissioning the operator if there is one. You need these services when a gate is bent beyond sensible repair, when posts have shifted, or when you’re adding a gate to a property that never had one. We handle residential and commercial work across Arlington, from a single driveway swing to a multi-unit entry, and our single-trade focus means the whole visit is a gate visit. We’re familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule, so if you already own an operator we can plan the new gate around it. Installation is quoted per job after we look at the site; the written estimate sets the final price, and the price is agreed before any work starts.

New Gates on Existing Posts

Sometimes the posts are sound and only the leaf and hardware need replacing. We check the footings and the plumb before deciding, because a new gate hung on a leaning post will drag within a season.

Replacing a Failed System

When a gate and its operator have both reached the end, we quote the replacement as one job. That keeps the measurements, the wiring and the commissioning under one plan instead of two contractors blaming each other.

Electric Gate Installation

Electric Gate Installation brings power to the gate: the operator, the control board, the power run and the safety devices that make automation safe to live with. You need it when a gate is being automated for the first time, when the existing operator has failed and the gate itself is still good, or when an older system has no safety edges and you want it brought up to a safer standard. We handle the motors, control boards, sensors and access hardware ourselves rather than subcontracting the electrical side, which is where a lot of general contractors stop. In Arlington we install electric systems on driveways, parking areas and gated entries for HOAs and businesses. Our technicians have up to 10 years of experience and have worked across FAAC and BFT equipment as well as residential-grade operators. This is scheduled work, so we quote a free measure and a written price rather than promising a same-day fit.

Power Runs and Control Boards

The power run is planned before anything is ordered, because distance from the panel and the route of the conduit change both the cost and the schedule. Inside the control board we set the travel limits, the pause timing and the reversing behavior to suit the gate.

Safety Devices We Fit

Photocells, safety edges and a reversing setting are not extras on an electric gate; they’re what makes it safe around children, pets and vehicles. We test each device at commissioning and explain what it does.

Driveway Gate Installation

Driveway Gate Installation is the job of putting a gate across a residential drive: choosing the style, setting the posts, hanging the leaf and clearing the ground so it swings or rolls without catching. You need it when a driveway is open to the street, when a gate has rusted or sagged past repair, or when a new drive is being finished and the entry needs to match. We install single and double swing gates and sliding gates for Arlington homeowners, in materials that suit the house and the amount of use the drive gets. Because we also handle repair, we build with the wear points in mind: hinges, stops and latches that can be serviced later instead of replaced. Driveway work is measured and scheduled, and the free on-site estimate gives you a written price before anything is fabricated or ordered.

Swing or Slide for Your Drive

A swing gate needs clear room to arc open, and a slope can make that awkward. A slide needs a run of clear ground beside the drive. We measure the space and recommend the type that fits it.

Posts, Footings and Grade

Posts go to proper footing depth for the gate’s weight, and we check the grade so the leaf doesn’t scrape as it moves. Getting this right at the start is what keeps a driveway gate working quietly.

Sliding Gate Installation

Sliding Gate Installation puts a gate on a track or cantilever system so it rolls sideways instead of swinging out into the drive or the street. You need it where a swing gate would block a parking space, where the drive is short, or where the ground slopes in a way that makes a swing awkward. We install track sliders and cantilever sliders for Arlington properties, residential and commercial, and we match the operator to the gate’s weight and travel. A sliding gate has no torsion springs to fail, but it does have rollers, tracks and, on cantilever systems, a counterbalancing frame that has to be set correctly or the gate will drift and strain the motor. Getting that geometry right is most of the job. Sliding work is measured and scheduled; the estimate is free and the written price is agreed before installation begins.

Track and Cantilever Systems

A track slider needs a level run and a clear channel; a cantilever needs a solid footing and a correctly balanced frame. We choose between them based on the ground you actually have, not a catalog preference.

Keeping the Run Clear

The gate needs its full travel clear of planting, bins and parked cars, or it will trip its safety devices constantly. We walk the run with you and mark what needs moving before the install day.

Gate Opener Installation

Gate Opener Installation is fitting the motor and controls that drive an existing or new gate, and it’s the part of the job that decides whether the gate feels effortless or fights you every morning. You need it when a manual gate is being automated, when an operator has died and the gate is still sound, or when a light-duty opener is being asked to move more gate than it can handle. We fit operators for both residential and commercial gates in Arlington and set the travel limits, force settings and safety devices at commissioning. We’re familiar with Linear and Viking operators alongside the residential brands, so we can match the replacement to the gate rather than the shelf. This is measured and scheduled work: a free on-site measure, then a written price agreed before we start.

Choosing the Right Operator

Duty cycle, gate weight and how many times a day the gate opens all point to different operators. A driveway used twice a day and a parking entry used two hundred times a day are not the same spec.

Commissioning and Testing

Once the operator is on, we set the limits so the gate stops where it should, tune the force so it reverses on contact, and test every safety device. Then we show you how to run it.

Gate Fabrication

Gate Fabrication is the build itself: cutting, welding and finishing a gate to the exact width and style a property needs, rather than forcing a stock size to fit. You need it when an opening is an unusual width, when a stock gate won’t match the house or the surrounding fence line, or when a damaged gate has to be reproduced in a matching profile. We build gates for Arlington driveways and entries and then install them, so the fabrication and the hang are planned together and the hinge points land where the posts actually are. That matters on older properties where nothing is quite square. Fabrication takes time, so this is scheduled work from the first measure; the free estimate sets out the design, the material and a written price you agree to before the build starts.

Custom Widths and Profiles

An opening that measures somewhere between two stock sizes is where fabrication earns its place. We measure the clear opening, allow for hinges and latches, and build to that number.

Finishing for the Long Run

Steel wants a proper primer and topcoat, and the finish on the welded joints is where cheap work shows first. We finish the gate so the weather doesn’t get into the seams.

Brands We Service

We work on your brand, and we know where each one tends to wear out. FAAC arms and sliders are common on heavier residential and light commercial gates, and the control boards reward a technician who has set them before. BFT operators show up on mid-weight sliders and swings, and the encoder settings are the usual source of odd behavior. Linear and Viking equipment turns up on residential driveways and small commercial entries, and both are straightforward to diagnose once you know the model.

On the residential side we’re familiar with Mighty Mule and Ghost Controls for light driveways, and with LiftMaster, DoorKing and Elite on everything from a home entry to a multi-unit property’s access system. Whether you have FAAC or any other make, we can help: the point is that we diagnose the actual system on-site, from the motor to the control board, rather than guessing from the outside. If your gate is automated and misbehaving, electric gate repair is where that starts; if the gate itself is failing, start with gate repair.

Signs You Need a Pro Right Now

• The gate reverses or stops halfway. Safety devices or travel limits are usually the cause, and a gate that reverses at random can catch a vehicle or a person. It needs diagnosing, not a force setting turned up.
• The operator runs but the gate doesn’t move. That points to a stripped gear, a slipping chain or a broken arm. Continuing to run it makes the damage worse and the repair more expensive.
• A sliding gate has jumped its track or drags. Rollers, track and frame alignment are involved, and a heavy leaf off its track can fall. Stop using it and have it looked at.
• Posts are leaning or the gate sags at the latch end. A sagging gate strains the hinges and, on an automated gate, the operator. Footing and hinge work is a specialist job.
• The control box is buzzing, tripping power or showing a fault. Control board and wiring faults are where untrained hands get hurt. Leave the cover on and call a technician.

Our Process, Step by Step

1. 1
   Call and describe the gate. Tell us manual or automated, swing or slide, and the brand on the operator if you can see it. That tells us what to bring and whether the visit is a repair or an installation measure. Call (855) 349-3550; we answer 24/7.
2. 2
   On-site measure and assessment. We check the opening, the posts, the grade and the power, and we identify the existing operator. On an automated gate we test the safety devices and the control board to see what’s reusable and what isn’t.
3. 3
   Written estimate. You get a clear price for the gate, the hardware and the operator, with the options spelled out. Nothing is ordered and no work starts until you agree to that written price.
4. 4
   Fabrication and scheduling. If a gate has to be built to width, we build it. Installation is booked for a day that suits you, and we confirm what needs clearing from the driveway beforehand.
5. 5
   Install, commission, hand over. We hang the gate, fit the operator, wire the access hardware, test every safety device and walk you through the controls before we leave.

How Much Does Gate Installation Cost in Arlington?

Our Service Area Near Arlington

We install gates across Arlington and the surrounding neighborhoods, including Bailey’s Crossroads, Tysons, Ravensworth, Kingstowne, Wakefield, Hayfield, Kings Park, Long Branch, George Mason, Newington Forest and Burke Centre. Installation work is measured and scheduled, so we book a free on-site estimate at a time that suits you and confirm the install date once the written price is agreed. Repair calls are handled with same-day service where the schedule allows. Start with Arlington for local service details, or check Bailey’s Crossroads and Tysons if you’re just outside the city line.

Frequently Asked Questions About Gate Installation in Arlington

Schedule Your Gate Installation Service in Arlington Today

Whether you’re replacing a failed gate or automating a driveway for the first time, we’ll measure it, quote it in writing, and install it with the operator matched to the gate. The estimate is free and there’s no obligation, and nothing starts until you agree to the price. Call (855) 349-3550. We answer 24/7, with fast dispatch from 7am to 7pm. Find more on Arlington Gate Service.

Written by the team at Arlington Gate Service.