Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Crosspointe
An electric gate that won’t open is a daily problem, and in Crosspointe it usually comes with a deadline attached. We repair automated gates here for homeowners, HOAs and small businesses, and we treat your operator as the specific system it is, not a generic box with a motor inside. That matters in a community where most gates date from the same build era and share the same weak points.
We work on the brand already installed on your property, from the motor to the control board, and we diagnose before we quote. Our technicians have up to 10 years of experience with residential and commercial gate operators. Call (855) 349-3550 for a free estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Why Crosspointe Homeowners Call Arlington Gate Service for Electric Gate Repair
We’re gate specialists, not generalists. Every job we take is a gate job, whether it’s a stuck swing gate on a residential driveway or a sliding operator at a community entrance, and that single-trade focus is why diagnosis tends to land on the actual fault rather than a guess.
Crosspointe has a strong local reputation for us because the housing stock here is so consistent. When we look at a gate in this community we already know what the original hardware likely is, which brands were common when these homes went up, and what tends to fail first. That saves time on the front end.
On response, we dispatch to Crosspointe the same day when the schedule allows, and our drivers know the layout around the Crosspointe community well enough to find the right driveway without a phone call. Free estimates are standard, and the price is quoted and agreed before any work starts.
We also hear from Crosspointe customers who’ve had a general contractor look at the gate and come back with a shrug. Familiar story. General trades subcontract electric gate work because the control board, safety sensors and access hardware sit outside their usual scope. We handle them directly.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Access Control in Crosspointe
Gate Access Control in Crosspointe starts with figuring out why the thing that lets you in has stopped letting you in, whether that’s a keypad that ignores every code, a remote that works from one angle only, or a call box that rings but won’t trigger the arm. We test the entry hardware against the operator, not in isolation, because a dead keypad and a failed control board can look identical from the driver’s seat.
A Crosspointe homeowner usually calls about access control when the gate is working fine for everyone except them, or when a code change after a move-in didn’t take. Repairing the entry point alone typically runs $150 to $400 for a keypad, receiver or remote issue. Swapping or reprogramming access hardware alongside a board-level fault adds labor, and the written estimate settles the number before we start.
Keypad and Remote Diagnostics
We check the keypad’s power and wiring first, then the receiver, then the board’s input terminals. Most access failures trace back to one of those three, and a technician who skips the sequence ends up selling a keypad that was never the problem. Remotes get programmed and range-tested on site.
Safety Sensor and Photocell Repair
Photocells and safety edges are wired into the operator’s stop circuit, so a misaligned or dirty sensor can make a perfectly healthy gate refuse to close. We realign, clean and replace sensors, then confirm the gate reverses correctly on obstruction. That check is not optional work in our book.
Commercial Gate Operator in Crosspointe
Commercial Gate Operator work in Crosspointe covers the shared entrances, driveway arms and multi-unit access points where one failure inconveniences dozens of people at once. When a community gate or a small business entrance stops operating, the fix has to account for traffic volume, duty cycle and the access hardware that a property manager or board relies on to control who gets through.
This is heavier equipment than a residential swing operator, and the brands we see here include Viking and FAAC alongside others. A commercial-grade operator board replacement or motor repair typically runs $600 to $1,800 depending on the unit and what’s failed, and retrofitting an older operator to a current control board often lands in the middle of that range. Every job is quoted in writing first, and no work begins until you’ve agreed the price.
High-Cycle Duty and Wear
A gate that cycles fifty times a day wears differently than one that opens twice. We look at the operator’s duty rating against actual traffic, because a residential-grade unit pushed into commercial service is a recurring repair bill waiting to happen. Where the duty cycle is the real issue, we’ll say so.
Access Hardware for Multi-Unit Properties
Intercoms, card readers, loop detectors and keypads on shared entrances all connect back to the operator, and any one of them can hold up the whole system. We diagnose the chain rather than the symptom, which is what property managers need when residents are calling about a stuck gate.
Trusted Brands We Service in Crosspointe
We work on your brand. The operators we service run from residential-grade systems like Mighty Mule and Ghost Controls to commercial units from FAAC, BFT, DoorKing and Viking, along with LiftMaster, Linear and Elite. That range matters here because Crosspointe’s original installations span several of these, and a technician who only knows one family of operators will misread the others. We don’t claim to stock parts, but we know these systems well enough to identify what’s failed quickly and source the right replacement. For same-day repairs, being able to say “that’s a Linear board and it’s obsolete” on the first visit shortens the whole process.
Common Electric Gate Repair Problems We See in Crosspointe Homes
- Control boards from the original build era. Many Crosspointe gates still run the board they were installed with, often LiftMaster or Linear, and humid summers slowly take them out. The symptom is a gate stuck open or cycling erratically with no obvious mechanical cause.
- Hinge posts that shift in freeze-thaw winters. Repeated freezing and thawing works hinge and latch fasteners loose and moves posts just enough to throw a gate out of alignment. That misalignment loads the operator and triggers repeated limit-switch faults.
- Sagging gates that stress the motor. Because dozens of homes here share the same builder-grade gate design, the same hinge failure shows up house to house along a single street. A dragging gate makes a healthy operator look broken.
- Discontinued builder-grade hardware and finishes. The original latches, hinges and finishes are no longer made, so an HOA-compliant repair means sourcing an exact match or documenting a retrofit kit that preserves the look. That’s a sourcing problem as much as a repair problem.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Crosspointe, VA
Typical electric gate repair in Crosspointe runs $180 to $450 for a straightforward fault like a sensor, keypad or limit switch, and $450 to $900 when the control board or motor has to be replaced. Retrofitting an older operator to a modern control board usually falls in the $500 to $1,200 range depending on the board and the wiring work involved. A full gate and operator replacement is a different category entirely and gets quoted after we’ve measured the opening. What moves the number: whether the gate needs realignment, whether parts are available or obsolete, and how much of the access chain has failed at once. Estimates are free, and the price is quoted and agreed before any work starts.
We Also Serve Cities Near Crosspointe
Our electric gate repair team also works in Crosspointe and the surrounding communities of Newington Forest, South Run, Burke Centre and Kings Park. If your gate is on the fritz and you’re just outside Crosspointe proper, call anyway and we’ll confirm coverage.
Serving Crosspointe, VA – Our Local Coverage Area
We serve Crosspointe and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Crosspointe
In most cases you can retrofit a modern control board onto the existing operator rather than replace the whole gate, and that’s usually the better value. We check the motor, gearing and hinge hardware first. If the mechanicals are sound, a board swap keeps the original gate and saves you the cost of a new one. Call (855) 349-3550 for a free estimate.
Yes, a gate that opens partway and reverses is very often a photocell or safety-edge fault, not a motor problem. The sensor circuit tells the operator something is in the way, so it stops and backs off. We test and realign the sensors before touching the board. Call (855) 349-3550 to get it diagnosed.
Yes, in most cases we repair the operator and keep your existing gate and its finish intact. That’s the whole point of retrofitting rather than replacing. Where a hinge or latch is discontinued, we source an exact-match part or a documented retrofit kit that satisfies the HOA. Call (855) 349-3550 and we’ll walk through your options.
Because Crosspointe was built in one coordinated wave, entire streets share the same builder-grade gate model, so they wear out on the same schedule. A sagging hinge on one house is often the first sign the neighbors are close behind. That’s why we check the hinge post and footing on every visit. Call (855) 349-3550 for a free estimate.
A solar opener can work with an older Crosspointe gate when the mechanicals are in good shape, but it’s not a cure for a worn hinge post or a dragging gate. We assess the gate’s alignment and weight first, then decide whether solar makes sense. Call (855) 349-3550 to talk it through.
Get Your Crosspointe Gate Working Again
If your electric gate is stuck, sagging or stuck cycling, we can diagnose it and quote the repair in writing before any work starts. Call (855) 349-3550 for a free estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Written by the team at Arlington Gate Service.