Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Navy
If your electric gate has stopped responding, is reversing without warning, or won’t close all the way, we work on the motor, the control board, and everything in between. We know Navy’s tight lots and mid-century subdivisions well, and we can get a technician out to most addresses here fast once we’ve confirmed what your gate needs. Before any work starts, you get a written estimate and you approve it, so there are no surprises after the fact. We answer 24/7 at (855) 349-3550, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Navy Homeowners Call Arlington Gate Service for Electric Gate Repair
We’re gate specialists, not generalists. Every job we take is a gate job, which means our technicians diagnose the actual brand in front of them rather than guessing at a system they rarely see. That matters more than it sounds in a place like Navy, where older automatic gates often mix hardware from different eras, and a generic repair call tends to fix the symptom instead of the cause.
We handle the motors, control boards, safety sensors, and access hardware that a lot of general contractors subcontract out or skip. Our technicians have up to 10 years of experience across residential and commercial systems. If your gate needs a full replacement rather than a repair, we handle installation too, so you don’t have to go find a second vendor halfway through the job. We’re a viable call whether you own a single-family home, manage a small HOA, or run a business with a controlled entrance.
If you’re searching for Electric Gate Repair in Navy, we cover the neighborhood and the surrounding streets. Call us at (855) 349-3550 for a free estimate.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Access Control in Navy
Gate Access Control work in Navy means something specific: it’s rarely about adding a system to a blank property and almost always about making a shared or existing entrance work the way residents expect. In the older subdivisions here, that can mean a keypad that’s stopped accepting codes at a shared entrance, a remote that no longer pairs after a control board swap, or a telephone entry system that won’t dial out. Most keypad and remote repairs in Navy run roughly $150 – $400, while control board diagnostics and replacement typically land in the $250 – $650 range. The written estimate you approve before we start sets the final price.
Keypad and Remote Diagnosis
A keypad that stopped responding isn’t always a dead keypad. It’s often a wiring or power issue upstream, or a code that got wiped when a board failed. We trace the signal path before replacing anything. Remote pairing problems get the same treatment.
Shared Entry Hardware
Gated communities here often run telephone entry or shared keypad systems that serve multiple households. When one fails, we look at the whole entry rather than just the pad, so the fix holds for everyone who uses it.
Commercial Gate Operator in Navy
Commercial Gate Operator work in Navy tends to come up at multi-unit properties, small business entrances, and HOA-controlled shared driveways. When a heavy-duty operator like a FAAC or Viking unit starts failing, the fix is different from a residential system: you’re looking at duty-cycle problems, worn gear racks, and control logic that has to keep working for dozens of users a day. Commercial operator repair here typically runs $450 – $1,200 depending on the operator and what’s failed. We quote the job in writing and you approve it before any work begins.
Duty Cycle and Rack Wear
An operator that cycles constantly wears differently than one used twice a day. We check the rack and pinion, the drive motor, and the control logic together, because a single worn part can mask a second failure.
Managing Multi-User Entrances
When a commercial or shared entrance goes down, every resident or tenant notices. We coordinate with the property manager or HOA so the repair doesn’t leave access compromised during the work.
Trusted Brands We Service in Navy
We work on the brand your gate already has. That includes FAAC, BFT, Linear, and Viking systems, along with the rest of the nine major operator brands we service. We don’t stock parts locally, but our familiarity with these systems means we can diagnose on-site and get the right parts ordered without guesswork. If you manage or own a property in Navy and you’re not sure what operator you have, we can identify it during a visit and tell you exactly what it needs. Fast turnaround on parts once the diagnosis is confirmed.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Navy Homes
- HOA approval delays on a straightforward operator swap. Because Navy’s lots are close together and the housing dates to mid-century, Fairfax County’s fence height and setback rules plus HOA covenants often require architectural approval before any visible hardware change. A new arm or control box that doesn’t match the community’s approved finish can hold up an otherwise simple job.
- Sagging swing gates from heaved hinge posts. Navy’s heavy clay soil and freeze-thaw winters push hinge posts out of position within a season or two after a wet winter. That throws off the operator’s limit settings and trips the safety photocell, which is why a gate that looks fine suddenly won’t close.
- Jam-packed slide gate tracks. The mature oaks and maples throughout Navy drop limbs and seeds every fall, and that debris jams slide gate tracks and warps wooden swing gates. Over time that wears the rack and pinion and leads to keypad failures at shared entrances.
- Stuck gates from swollen wood and rusted steel. Summer humidity swells wooden gates and rusts the steel hardware on original wrought-iron driveway gates. The result is dragging hinges, stuck latches, and an operator that has to work harder than it should.
Pricing for Electric Gate Repair in Navy, VA
Here’s what electric gate repair typically costs in Navy. Gate motor repair runs about $300 – $800, opener repair around $250 – $600, and safety sensor repair roughly $150 – $350. Keypad repair sits near $150 – $400 and control board repair in the $250 – $650 range. What moves the number is the operator brand, whether the post footing needs resetting, and whether compliance with HOA covenants or Fairfax County’s rules requires matching hardware rather than a straight swap. We give a free estimate and a written price you approve before any work starts, so the invoice matches the quote.
We Also Serve Cities Near Navy
Navy sits inside the Route 29/50 corridor near Fairfax City, and we also serve the surrounding communities. If you’re in Braddock, Fair Lakes, Fair Oaks, or Franklin Farm, we cover electric gate repair there as well. Call (855) 349-3550 to confirm coverage for your address and get a free estimate.
Serving Navy, VA – Our Local Coverage Area
We serve Navy and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Navy
Often yes, if the repair changes anything visible from the street or shared sightlines. Navy’s mid-century lots are narrow and densely packed, and many older subdivisions have HOA covenants requiring architectural approval before hardware changes. A like-for-like repair may not need it; a new arm, control box, or finish usually does. We can walk through what your job involves before anyone touches the hinge post. Call (855) 349-3550 for a free estimate.
It’s usually the safety photocell, triggered by a misaligned sensor, a leaning post, or something interrupting the beam. Navy’s freeze-thaw winters heave the hinge posts, and that throws off the operator’s limit settings and the sensor alignment together. A technician checks the entrapment protection and resets the post before resetting the limits. Call (855) 349-3550 for an exact quote.
A hinge post that has heaved out of the clay soil. Navy’s heavy clay and wet winters push posts out of position within a season or two, which drags the gate across brick walkways and forces the operator to fight the sag. The fix is resetting the footing to proper depth and correcting the sag at the hinge. Call (855) 349-3550 to book a free estimate.
Yes. We work on shared keypads and telephone entry systems for gated communities and multi-unit properties throughout Navy, and we coordinate with property managers or HOA boards on access during the work. Call (855) 349-3550 for a free estimate.
Automatic gate operators generally require entrapment protection, and safety sensors or photocells are the standard way to meet that. We verify the entrapment protection on every service call, because a covered or misaligned sensor is a real crush hazard. A trained technician handles this, not a homeowner. Call (855) 349-3550 for an exact quote.
If your gate is stuck open, reversing without warning, or making a noise it didn’t used to make, call Arlington Gate Service at (855) 349-3550 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our electric gate repair team covers Navy and the surrounding communities.
Written by the team at Arlington Gate Service.