Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateDoorKing Gate Repair in Arlington, VA
Arlington Gate Service provides independent DoorKing repair, installation and service across Arlington, VA. The one thing that makes our DoorKing work here different: on this county’s near-zero-setback lots, a swing operator is often fighting a gate hung on a post shared with a neighbor’s fence line, so we fix the geometry before we touch the board. From the motor to the control board, we diagnose the actual fault rather than defaulting to a whole-system swap. Call (855) 349-3550. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Arlington Residents Choose Us for DoorKing Service
We’re gate specialists, not generalists. Every job we take is a gate job, which is why we can tell a failing operator from a failing gate on a DoorKing system without guesswork. DoorKing operators turn up across Arlington’s older close-in neighborhoods, and they’re frequently several owners deep on a lot that has been redeveloped or re-fenced, so familiarity with the equipment matters more here than it does on a new build.
We work on your brand. We service nine operator brands, from residential-grade units to heavy commercial systems, and we cover DoorKing DoorKing alongside the rest, which means we diagnose what’s actually in front of us instead of pushing a replacement we sell. Motor repair, hinge and post repair, and phone entry work all sit inside the same gate-only focus. We use quality parts that fit the equipment, not whatever is closest on a shelf. Scheduling is straightforward: you tell us what the gate is doing, we book the visit, and we confirm the scope before anything gets ordered or swapped.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common DoorKing Gate Repair Problems We Solve in Arlington
Most DoorKing calls in Arlington fall into a handful of patterns. The brand’s operators are reliable; what fails first is usually the gate around them.
- Frost-heaved posts straining a swing operator. Arlington’s freeze-thaw winters lift and tilt posts, and a DoorKing swing operator mounted on an out-of-plumb post fights a bound gate instead of moving it. The operator reads the resistance as an obstruction and trips, which looks like an electrical fault and usually isn’t.
- Swollen wood and racked vinyl throwing off limits. Hot humid summers and heavy thunderstorms swell wood gates and rack lighter vinyl and aluminum ones. A gate that grew a quarter inch of travel throws off limit switches, and the operator starts reversing or stalling mid-swing.
- Corroded phone entry boards and wiring. Aging 1812 and 1833 telephone entry and intercom units lose dial tone or call-through when the board and the wiring run behind it have corroded. Older wiring runs on Arlington properties carry a lot of that moisture damage.
- Battery backup and control board faults after storm outages. Repeated outages expose failing batteries and control boards on swing operators. The symptom is a gate stuck open or dead when power drops, which is exactly when you need it working.
- Heaving posts on shared fence lines. A sagging gate here often sits on a post that’s shared with a neighbor’s back-to-back fence. The hinge or the post has to be re-set before the operator can be made to swing true.
DoorKing Service in Arlington: What Local Conditions Mean for Your Equipment
Arlington’s near-zero-setback lots are the single biggest factor in DoorKing repair work here. Driveways and gates sit tight against property lines and neighbors’ fences, so a DoorKing swing gate is often hung on a post shared with a back-to-back fence line. When that hinge sags or the post heaves through a freeze-thaw winter, the question of whose post needs re-setting comes before any operator adjustment. Add the county’s tree-preservation and setback rules, which constrain where a replacement post can go when a protected mature oak runs along the property line, and a simple hardware repair becomes a measured decision about geometry and siting. Then there’s the redevelopment churn: a technician often works on a gate installed by three different owners on a lot that’s been subdivided or re-gated, so matching and re-hanging an old gate into a new fence line is routine. In older close-in neighborhoods, the practical result is that DoorKing operators get blamed for faults that start in the fence.
DoorKing Models & Products We Service in Arlington
We service the swing gate operators, slide gate operators, telephone entry units and intercom systems that make up the DoorKing line, residential and commercial alike. On the swing side that includes the 6050 and the 6400/6500 family; on the slide side the 9000 family; on entry hardware the 1812 and 1833 telephone entry and intercom systems. We also handle the access hardware, safety sensors and control boards that tie a system together.
Parts selection is deliberate. When a genuine DoorKing board, limit switch or entry-system component carries the failure, we use it. When the OEM part is overkill for the job, we use quality aftermarket hardware for hinges, rollers and loops. Where a 20-plus-year-old operator’s chassis and gearbox are sound, we repair the control and drive components rather than pushing a full replacement. From the motor to the control board, every part has to fit the equipment in front of us.
See the difference
Before
After
Before
After
Before
AfterDoorKing Service Pricing in Arlington
Every DoorKing job is priced per job by a written estimate, quoted and agreed before any work starts. That’s the number you hold us to. We don’t publish a rate card because a hinge re-set and a control board swap are not the same call. What drives the estimate: which subsystem has failed (operator motor, control board, telephone entry board, wiring), how much post and hinge work the gate needs before the operator can function, and whether the fix is a repair or a measured replacement. The estimate is free and includes a full look at the operator, the gate’s swing geometry and the entry hardware, so the written price covers the whole job rather than the first thing we find. If the gate needs to come off the operator for post work, that’s in the estimate too. For an exact figure, call (855) 349-3550.
Serving Arlington, VA – Our Local Coverage Area
We serve Arlington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DoorKing Gate Repair in Arlington
It’s usually the gate. Storm winds rack lighter vinyl and aluminum gates and swell wood ones, which throws the gate out of plumb and pushes the operator’s obstruction sensing. A typical Arlington call is a DoorKing 6050 swing operator that reverses or stalls partway through travel after a winter of freeze-thaw and a summer of swelling; the gate is binding on a heaving post or a sagging hinge, not a failed board. A qualified pro checks swing geometry and post plumb first, re-hangs or re-sets the hardware so the gate travels freely, then resets the operator’s limits and tests obstruction sensing. Call (855) 349-3550 for a free estimate.
The usual cause is corrosion on the entry board or the wiring behind it, not a failure of the phone system inside. Older wiring runs on Arlington properties pick up moisture, and the call-through circuit is the first thing to go. We test the board and the line at the unit before deciding whether it’s a component repair or a replacement. Call (855) 349-3550 to get it diagnosed right the first time.
Yes, and it’s routine here. On Arlington’s near-zero-setback lots, the post is often shared, so the first step is establishing which post needs re-setting and where the property line puts it. The county’s tree-preservation rules also limit where a replacement post can go when a protected tree sits along the line, so the site gets measured before any digging. We handle the hardware and the geometry; you handle the conversation with the neighbor. Call (855) 349-3550 for a free estimate.
It will if the battery is healthy and the control board is managing the charge properly. The failure we see most is a battery that’s been quietly dying through repeated outages, or a board that no longer charges it, leaving the gate stuck open or dead exactly when the power drops. We test the backup circuit on a service visit and tell you whether it’s the battery or the board. Call (855) 349-3550 for a free estimate.
Repair it if the chassis and gearbox are sound. On a 20-plus-year-old operator in good mechanical condition, the failing parts are usually the control and drive components, and repairing those costs far less than a full replacement. If the gearbox is worn out or the chassis is rusting through, replacement makes more sense. We give you that judgment from what’s on the gate, not from a replacement quota.
Service Areas Near Arlington
We serve DoorKing systems across Arlington and the neighborhoods around it, including Arlington proper, plus Bailey’s Crossroads, Bailey’s Crossroads, Tysons, Tysons, Ravensworth, Kingstowne and Wakefield. If your gate sits just outside the county line, call and we’ll confirm coverage.
Book Your DoorKing Service in Arlington Today
A DoorKing gate that stalls, reverses or goes dead on power loss gets worse with every season of freeze-thaw and storm wind. We diagnose the actual fault, fix the gate geometry before the board, and quote the whole job in writing before work starts. Same-day service where scheduling allows. Call (855) 349-3550. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free.
Written by the team at Arlington Gate Service.