Ghost Controls Gate Repair Service in Arlington, VA

Why Arlington Homeowners Choose Ghost Controls Gate Repair

We provide independent Ghost Controls gate repair in Arlington, and our technicians have up to 10 years of experience working on swing and slide operators like yours. That means we know the controller behavior, the battery and solar accessory wiring, and the way these systems fail after a Virginia storm. We’re an independent Ghost Controls service provider, not affiliated with or authorized by the manufacturer, so we diagnose what’s actually failing instead of working from a warranty script. Call (855) 349-3550 for a free estimate. We answer 24/7.

Call (855) 349-3550

Arlington is built tight. Most residential lots are small and near-zero-setback, so driveways and gates sit close to the property line and to a neighbor’s fence. That shapes our Ghost Controls work here in ways an owner in a sprawling suburb never runs into. A lot of the calls we take in Arlington aren’t purely hardware problems. They’re set-back and fence-line problems first: a post that belongs to somebody’s neighbor, a gate that has to swing within inches of a shared fence line, or a recent redevelopment where a new fence replaced the old one and left the old operator mounted to a post that no longer lines up. The county’s steady tear-down and rebuild churn means a technician here often works on gates that two or three previous owners touched. Matching and re-hanging older gate hardware into newly built fence lines is normal work for us in Arlington.

Our technicians have up to 10 years of experience working on an aging brick Colonial in a close-in neighborhood, a postwar brick rambler, and the new infill townhomes where the gate has to be shoehorned into a narrow side yard. That experience matters most when an operator isn’t the real problem. The gate is binding, or a post has heaved in the frost cycle, and the operator has been straining against it. We’re gate specialists, not generalists, so every job we take is a gate job. Are you in Arlington and need your Ghost Controls system looked at? Call (855) 349-3550. Our estimate is free, and the price is set per job by the written estimate.

Why Trust Arlington Gate Service for Your Ghost Controls Gate Repair?

We work on Ghost Controls operators every week, from a single swing Tiger Series unit to a heavy-duty dual swing in a larger driveway. That’s a lot of time spent inside these systems, and it produces a kind of familiarity a general contractor can’t bring. A handyman who sees one every few months learns on your gate. We’ve already seen the receiver stop pairing after a storm surge, the solar-charged backup battery drop below usable voltage, and the arm on a tube gate bend from the gate sagging. We know which symptom points to which component before we’ve opened the housing.

Our independence works in your favor. We aren’t tied to a manufacturer’s warranty flow and we aren’t a dealer pushing a new operator. When a control board has failed, we test the board and tell you so. When a battery won’t hold a charge, we replace the battery. When the gearbox or chassis is gone, we say that plainly too. Get it diagnosed right the first time and you avoid paying twice for the same call.

We perform this work with quality parts that fit Ghost Controls equipment, and we take the same care with the wiring and accessory connections that a warranty claim would expect. That means no shortcuts that put your coverage at risk. We handle the full spread of Ghost Controls products, residential or commercial, and we’re equally comfortable on a homeowner’s single swing gate and an HOA’s shared drive gate. Everything we do sits under one roof: repair and installation. Call (855) 349-3550 to book a visit.

Common Ghost Controls Gate Repair Problems We Fix in Arlington

These are the failures we see most often on Ghost Controls systems in Arlington, and each one has a known cause we can usually pin down on the first visit.

• Control board and receiver damage after summer storms. Virginia’s heavy summer thunderstorms bring power surges that hit the board or the receiver. The symptom is a remote that stops pairing, or a gate that runs smoothly in one direction and not the other. Board-level diagnosis is where our specialist focus pays off, because a general tech will often guess at the motor when the fault is in the electronics.
• Backup battery draining below usable voltage. A lead-acid backup battery that won’t hold a charge produces a gate that stalls mid-travel or beeps and reverses. On solar-charged units in Arlington, the drain often shows up as erratic behavior late in a run of short winter days rather than a clean failure. A failing battery is one of the cheapest repairs we make, and it’s also the one most often misdiagnosed.
• Arm and actuator wear on tube gates. Bent push arms, stripped pivot bushings, and gates that have sagged far enough that the operator strains against a binding hinge. This is common where a wooden gate swells in our humid summers and sticks in the frame. The operator isn’t always at fault. Often it’s a hinge or a post that needs attention alongside the arm.
• Obstruction-sensor and safety-loop faults. A gate that reverses unpredictably or refuses to close is usually a sensor problem, not an operator problem. Moisture in the accessory wiring or a corroded connector is the common cause here. A back-to-back fence line shared with a neighbor is often where that buried wiring runs, so we check the whole circuit rather than just the sensor head.
• Post and mounting alignment after redevelopment. When a lot gets subdivided or re-gated, an older operator often ends up mounted on a post that no longer sits true to the new fence line. The result is a gate that binds, which wears the arm and the operator. Re-aligning the mounting and re-hanging the gate is real work, and in Arlington with its tree-preservation rules, re-setting a post near a protected mature oak needs care.

Ghost Controls Parts & Our Repair-vs-Replace Approach

We use genuine Ghost Controls boards, arms, batteries, and receivers where the part is available. For standard hardware like hinges, posts, and solar components, we use quality aftermarket replacements that are built to fit the system. What we won’t do is claim a part is genuine when it isn’t. We’re straightforward about what goes into your gate.

The repair-or-replace decision comes down to what’s actually failed. If the operator is sound and only an arm, a board, or a battery has failed, repair is the honest and cheaper answer, and we’ll tell you so. If the chassis or the gearbox is gone, replacing the operator is the only call that makes sense, and we’ll say that plainly rather than sell you a part that fails a few months later. A troubleshooting decision like this depends on a real diagnosis, not a sales target.

Our diagnostic path typically starts with the battery and the control board, exactly as a qualified local pro should. Then we check arm and hinge alignment, and finally the sensor and accessory wiring. We repair or replace the failed component rather than selling a whole new operator when a smaller fix is warranted. Get a written estimate before anything starts. Call (855) 349-3550 for a free one.

Our Ghost Controls Service Process – Step by Step

1. 1
   Diagnosis. We start by verifying the specific Ghost Controls operator on-site and testing the control board, receiver, backup battery, and solar or accessory wiring. We check arm and hinge alignment and confirm whether the gate itself is binding before we blame the operator. This is where a specialist reads the actual brand rather than applying a one-size-fits-all fix.
2. 2
   Repair or install. Once the cause is confirmed, we perform the repair, or we install the new operator or replacement accessory. You get a written estimate and agree to the price before any work starts. On a new install, we mount the operator to a post that sits true to the fence line, which matters on Arlington lots where the gate runs close to the property boundary.
3. 3
   Test. We run the gate through its full travel in both directions, then verify the obstruction sensors, safety loops, remote pairing, and battery backup. The gate has to open and close cleanly on the new or repaired component before we call the job done.
4. 4
   Warranty and handoff. We explain what failed, what was replaced, and how to keep the system running through our humid summers and freeze-thaw winters. We leave you with a clear picture of the work, not a vague verbal promise. We answer 24/7, and fast dispatch runs 7am to 7pm. Book a visit by calling (855) 349-3550.

Ghost Controls Products We Service & Install in Arlington

We service and install the full range of Ghost Controls equipment found on Arlington driveways and side yards. That includes single swing operators like the Tiger Series (TSS1), heavy-duty dual swing operators like the TDS2, and tube gate operators using the TSS1 or TDS2 tube-mount kits. We also handle the accessory side: solar and battery-backup kits like the AXDP and AXPB, remote and receiver troubleshooting, safety sensors, and the wiring that ties it all together. Whether your gate is on an older brick Colonial lot or a new infill property with a narrow side yard, we cover the repair and the installation. No model line is off limits; these are the systems we work on weekly.

We Also Service These Brands

Ghost Controls is one of nine major gate operator brands we work on. We’re equally at home with LiftMaster and Mighty Mule on residential gates, and with DoorKing on commercial and multi-unit access. That range matters when an HOA has mixed brands across a property, or when a replacement operator comes from a different manufacturer. Our technicians diagnose the actual brand on-site. Arlington Gate Service handles gate repair, electric and automated gate repair, and gate installation across all of them.

FAQs – Ghost Controls Gate Repair Service in Arlington

Book Your Ghost Controls Service in Arlington, VA

If your Ghost Controls operator is stalling, beeping, losing its remote, or straining against a sagging gate, we’ll diagnose the actual cause and fix what’s failing. Call (855) 349-3550 for a free estimate. We answer 24/7. Fast dispatch runs 7am to 7pm, Sunday through Friday. We’re closed Saturday. The price is set per job by a written estimate, agreed before any work starts. Arlington Gate Service covers gate repair, electric gate repair, and installation across Ghost Controls and eight other leading brands.

Written by the team at Arlington Gate Service.