Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Access Control Cost in Arlington?
Gate access control in Arlington typically costs $650 to $2,800 for a complete residential system, with most homeowners landing around $1,400 for a keypad, a low-voltage operator, two safety sensors, and a remote. Repairing the access side of an existing gate is cheaper, usually $180 to $650 depending on whether you’re replacing a keypad, a receiver, a control board, or wiring. Commercial and multi-unit systems with telephone entry and a directory run higher, generally $2,200 to $6,500 installed.
Those ranges are typical estimates for the Arlington market in 2026. The written estimate we put together after looking at your gate sets the final price.
If your access control has stopped working or you’re pricing out a new system, call (855) 349-3550 for a free estimate. We answer 24/7, and fast dispatch from 7am to 7pm runs Sunday through Friday.
Key Takeaways
- A complete residential gate access control system in Arlington usually runs $650 to $2,800 installed.
- Repairing a keypad, receiver, control board, or wiring usually costs $180 to $650.
- Commercial and multi-unit systems with telephone entry typically run $2,200 to $6,500.
- Access control is separate from the operator: the gate motor moves arms or panels, while access control decides who is allowed to trigger it.
- Estimates are free, and the price is set per job by the written estimate after we look at your gate.
Gate Access Control Cost Breakdown (2026)
Here’s how the individual pieces break down for a typical Arlington job. These are installed prices, meaning parts plus the labor to mount, wire, program, and test them.
| Item | Typical installed cost |
|---|---|
| Standalone keypad (residential) | $180 – $420 |
| Intercom keypad with call feature | $380 – $850 |
| Radio receiver for remotes | $150 – $350 |
| Loop detector with loop installed in driveway | $450 – $900 |
| Photocell safety sensors (pair) | $180 – $400 |
| Control board replacement | $320 – $700 |
| Telephone entry system (commercial/multi-unit) | $1,600 – $4,800 |
| Complete residential access control system (keypad + operator interface + sensors + remotes) | $650 – $2,800 |
| Complete commercial access control system | $2,200 – $6,500 |
| Gate repair or diagnosis visit (repair included) | $180 – $650 |
What pushes cost up or down comes down to a few things. The biggest one is whether you’re adding access control to a gate that already has a working operator, or whether the operator itself needs to come out. A keypad swap is a small job. A control board replacement on a commercial operator is a bigger one because the board has to be matched to the specific brand and tested against every safety device on the gate. The other big driver is wiring: if a low-voltage line already runs from the house or building out to the gate, the job is straightforward. If that wire has to be run fresh, the labor grows.
Homeowners often ask why their system is separate from the operator. The reason is that access control (keypads, receivers, sensors, telephone entry) sits between the user and the operator. On a gate repair and installation team visit we treat both as one system, because a keypad that doesn’t work usually means the operator’s board isn’t reading it, not that the keypad is bad.
What Affects Gate Access Control Pricing in Arlington
- Brand and system type. Access control behaves differently on a LiftMaster or Linear residential operator than it does on a commercial FAAC, BFT, or DoorKing system. Matching a keypad, receiver, or control board to the brand on your gate is where the diagnostic time goes, and that’s the part a generalist often gets wrong. Our technicians have up to 10 years of experience across nine operator brands, so we recognize what’s in front of us rather than guessing.
- Residential versus commercial. A single-family driveway keypad is a small install. A multi-unit building or HOA entrance with a directory, telephone entry, and a pedestrian gate is a bigger job with more safety logic to wire and test. That’s why the two ranges don’t overlap much.
- New install versus retrofit. Adding access control to a gate that already has an operator is cheaper than starting from scratch, because the operator, its power, and its safety devices are already in place.
- Existing wiring and power. If your gate already has a low-voltage run and a receiver, a keypad upgrade is quick. If conduit has to be run or wiring has to be replaced, labor increases accordingly. Old wiring is also a common reason a new keypad “doesn’t work” out of the box.
- Gate type and operator. Slide gates, swing gates, and overhead systems behave differently under an access control load, and heavy gates need operators with more inputs. Since every job we do is a gate job, we can match the access hardware to the gate rather than adapting one-size-fits-all parts.
- Property access and code context. Arlington properties sit on tighter lots and denser streets than most of the surrounding region, which affects where a keypad, intercom, or pedestal can go and how the low-voltage run reaches the gate. Commercial entrances in busy corridors have to keep a working pedestrian path open during install, and that sequencing is part of the labor.
How to Save on Gate Access Control
You don’t need to buy a whole system to fix a small problem. A few practical ways to keep the number down:
- Fix the failing part, keep the rest. If the operator, wiring, and safety sensors are healthy and only the keypad or receiver is dead, replacing that one component is far cheaper than a full replacement.
- Reuse existing wiring. If a low-voltage run and conduit are already in the ground, say so when you call. It can remove the heaviest labor line on an access control upgrade.
- Group the work. Replacing a control board and adding a receiver, keypad, and new remote set at the same time costs less than four separate visits, because the wiring and testing get done once.
- Get it diagnosed right the first time. Misdiagnosis is the most expensive part of gate work. A keypad blamed for an operator board failure leads to paying twice. Since we handle repair and installation under the same roof, the same team that diagnoses your problem is the one that fixes it.
- Ask for a written, itemized estimate. The prices on this page are typical ranges, not a quote. An itemized estimate shows you exactly what the final number buys, which makes it easier to trim items you don’t need. Estimates are free.
If you’re not sure whether your system can be repaired or needs new hardware, call (855) 349-3550 and we’ll work it out with you. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Closed Saturday.
FAQs – Gate Access Control Cost
How much does a gate access control system cost in Arlington?
A complete residential system typically costs $650 to $2,800 installed, and a commercial or multi-unit system typically runs $2,200 to $6,500. The upper end covers telephone entry, a directory, and multiple safety devices. Call (855) 349-3550 for an exact quote. Estimates are free.
How much does it cost to replace a gate keypad or intercom in Arlington?
A residential keypad usually costs $180 to $420 installed, and an intercom keypad with a call feature runs $380 to $850. If the wiring behind the keypad is failed, that adds labor. Call (855) 349-3550 for an exact quote on your gate.
Is it cheaper to repair or replace a gate access control system in Arlington?
Repair is usually cheaper when only one component has failed, at $180 to $650 versus $650 to $2,800 for a full residential replacement. Replacement makes more sense when multiple parts have failed or the operator is at the end of its life. Call (855) 349-3550 and we’ll tell you which is the better spend for your gate.
Can you come today for gate access control repair in Arlington?
In most cases, yes. Same-day service is available, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (855) 349-3550 to get on the schedule. Estimates are free.
Why is my gate access control failing?
Keypad and intercom failures usually trace to three things: dead batteries in the keypad or remote, a failed receiver, or a control board that no longer reads inputs. Repair typically costs $180 to $650, and a correct diagnosis is the difference between a small fix and a full replacement. Call (855) 349-3550 for a free estimate.
What Happens When You Call
When you call, we’ll ask for the brand on your gate and any model numbers you can find on the keypad, intercom, or operator, plus a description of what’s happening. That’s enough to know whether we’re looking at a repair, an upgrade, or a full system. From there we arrange a free on-site estimate, look at the gate and wiring in person, and hand you a written price before any work begins.
Because we work on nine operator brands, including Arlington homes and businesses running LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, we can diagnose the actual equipment on-site rather than applying a one-size-fits-all answer. From the motor to the control board, access control gets diagnosed and fixed by the same crew. If a full replacement turns out to be the right call, we handle that too, so you don’t have to source a second vendor.
Get a Free Gate Access Control Estimate in Arlington
Whether your keypad has stopped responding, your intercom is dead, your gate keeps opening on its own, or you’re pricing a brand-new system for a home, HOA, or commercial entrance, the free estimate is the place to start. We’ll look at the gate, match the access hardware to your operator, and give you a written price before anything gets touched. Call (855) 349-3550. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday.
Pricing reflects the Arlington market as of 2026. Arlington Gate Service offers free estimates – call (855) 349-3550.
Written by the team at Arlington Gate Service.
What Our Customers Say
"Second time using them. Same guy, same good work."
- Imani Coleman"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Craig Whitaker"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Katie Hoffman