Gate Repair Cost in Arlington - What It Actually Costs, Quoted Free

Wrought iron

Wood & steel frame

Farm & ranch

Sliding driveway gates

LiftMaster operators

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Before & after

See the difference

Recent ProjectFull RestorationComplete Upgrade

BeforeAfter

BeforeAfter

BeforeAfter

How Much Does Gate Repair Cost in Arlington?

Gate repair in Arlington typically runs $175 to $650 for most residential jobs, with the broad middle of that range landing around $250 to $400. Simple fixes like a misaligned hinge, a bent roller, or a receiver that stopped pairing sit at the low end. Electric and automated repairs that involve a motor, control board, or safety sensor push toward the high end, and commercial operators on multi-unit or business properties often climb past $650.

That’s a typical range for the Arlington market, not a fixed menu. Gate systems vary enormously – a Mighty Mule driveway opener is a different animal from a DoorKing swing operator on a condo entrance – so the written estimate after we look at your gate is what sets the final price. Estimates are free, and we answer 24/7.

Key Takeaways

• Most residential gate repairs in Arlington fall between $175 and $650.
• Electric and automated repairs (motor, control board, sensors, access hardware) cost more than mechanical fixes because the diagnostics are deeper.
• Brand matters. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and diagnosing the actual system on-site avoids paying twice for a misdiagnosis.
• The estimate is free and the price is set per job by the written estimate, so the number you see before work starts is the number you pay.

Gate Repair Cost Breakdown (2026)

Here’s how individual line items typically price out in Arlington for 2026. These are estimated ranges to help you plan; your written estimate is the final word. The anchor each job starts from is a full gate repair visit that covers diagnosis and the fix itself.

The single biggest driver of where you land in that table is whether the problem is mechanical or electrical. A gate that sags, drags, or has slipped a track is usually a same-visit mechanical fix and sits at the lower end. Once the operator is involved – the motor, the board, the sensors, the access hardware – the diagnostics take longer, parts cost more, and a general handyman without gate-specific experience will often misdiagnose the symptom. We’re gate specialists, not generalists, so the diagnosis starts from the actual brand and system type on your property rather than a guess.

A second driver is brand and grade. Residential operators from Mighty Mule and Ghost Controls use different parts economics than commercial units from FAAC, BFT, DoorKing, or Viking. We work on your brand, and knowing the specific board, motor, and access hardware changeover for each means fewer callbacks and less guesswork. If you’re deciding whether to repair or replace, that conversation is part of the free estimate.

What Affects Gate Repair Pricing in Arlington

• Manual vs. automated. A manual swing or slide gate has only mechanical parts to fix, so costs stay low. An automated gate adds an operator, control board, safety sensors, and access hardware – any of which can be the actual failure point, and each has its own part cost.
• Operator brand and grade. Residential-grade operators (Mighty Mule, Ghost Controls, Linear) are less expensive to service than commercial/industrial systems (FAAC, BFT, DoorKing, Viking). The part and diagnostic costs follow the grade of equipment.
• Slide vs. swing. Slide gates carry additional track, roller, and guide hardware that wear and need replacing, which can add to the bill. Swing gates concentrate cost in hinges and the operator arm.
• Access hardware complexity. A single remote and receiver is a quick fix. Intercoms, keypads, loop detectors, and multi-user access systems on HOA or commercial properties take more time to diagnose and re-program.
• Property type and site conditions. A driveway gate on a single-family lot is a different job than a shared entrance on a multi-unit Arlington property, where the operator runs harder, the wiring is more involved, and access coordination with the property takes time.
• Whether it’s a repair or a full replacement. Repairing a failing part is almost always cheaper than replacing the operator or the whole system. When the operator is at the end of its life, replacement can be the better long-run value, and we handle both – so you don’t have to source a second vendor for a full swap.

One more factor worth naming: the weather and climate in Northern Virginia. Freeze-thaw cycles through the winter work on gate posts, footings, and hinges, and summer humidity swells wood and taxes outdoor electronics. Those conditions don’t change our hourly pricing, but they’re a common reason gates go out of alignment or operators act up at particular times of year, and they inform what we check on-site.

How to Save on Gate Repair

The most reliable way to keep gate repair costs down in Arlington is to fix the small stuff before it becomes a motor or control-board problem. A dragging gate that grinds against a post puts strain on the operator every time it cycles. Left alone, that turns a $200 alignment into a $700 motor job. Catch it early and the price stays at the low end of the table.

• Schedule a diagnostic before guessing. Throwing parts at a gate based on a symptom is the most common way people overspend. A specialist diagnosis on the actual brand and system type prevents paying twice.
• Keep the moving parts moving. Hinges, rollers, and guides that are cleaned and kept free of grit last longer and reduce operator strain. We don’t sell a service plan; a one-time maintenance visit is priced per job after we look at the gate.
• Fix the sensor, not the motor, when the sensor is the problem. A gate that reverses unexpectedly or won’t close is very often a safety-sensor fault, not a dead operator. Correct diagnosis here saves the most money.
• Get the free estimate in writing. The written estimate sets the final price, so there’s no surprise on the invoice. Call (855) 349-3550 and we’ll talk through what you’re seeing and get a technician out.
• Ask about repair vs. replacement honestly. If a repair buys you years, that’s the cheaper call. If the operator is spent, replacing it now beats paying for repeated fixes. We’ll tell you which applies.

What Does It Cost to Repair an Electric or Automated Gate in Arlington?

Electric and automated gate repair in Arlington typically costs $250 to $800, depending on whether the fault is in the access hardware, the safety sensors, the control board, or the motor itself. Access-hardware and sensor fixes sit at the low end; control-board and motor work sit at the high end. Commercial operators on multi-unit and business properties often exceed that range.

This is the part of gate repair where specialist knowledge pays off most. Automated gates fail in ways that look alike from the outside – a gate that won’t open could be a dead receiver, a tripped safety sensor, a failed board, or a burned-out motor, and the wrong diagnosis wastes money and time. We handle the motors, control boards, safety sensors, and access hardware ourselves rather than subcontracting them out, and we work on your specific brand, whether that’s LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule.

What Does It Cost to Install a New Gate System in Arlington?

A new automated gate system in Arlington typically runs $1,800 to $5,500 or more, depending on the gate, the operator grade, and the access hardware. A residential driveway swing operator sits toward the lower end; a heavy-duty commercial slide system with loop detectors and multi-user access climbs well past it. Manual gate installation is less because there’s no operator or wiring.

We handle installation alongside repair, so if a full replacement is the smarter move, you’re not sourcing a second vendor to do the work. The estimate covers the system and the setup, and the written number sets the final price. If you’re weighing a new install against another round of repairs, that’s a conversation worth having on-site during the free estimate.

Same-Day Repair and What Happens When You Call

Gate problems don’t wait for a convenient day, and a gate that won’t close on an Arlington property is a real security gap. When you call, we’ll ask what your gate is doing, what brand and system type it is if you know, and whether it’s manual or automated. That lets us come prepared. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Same-day repair is often possible when you call early.

Why a Gate Specialist for Arlington Gate Repair?

Gate work is all we do. Every job is a gate job, which means diagnostic accuracy and parts familiarity run higher than a multi-trade shop splitting attention across dozens of service types. General contractors typically subcontract out the electric and automated side – the motors, boards, sensors, and access hardware – and that hand-off is where misdiagnosis creeps in. We keep it in-house and get it diagnosed right the first time. With up to 10 years of technician experience and certified familiarity across nine major operator brands, we cover the full spectrum from light-duty residential openers to heavy-duty commercial systems, for homeowners, HOAs, and business owners alike. Learn more about who we are at Arlington Gate Service.

FAQs – Gate Repair Cost

How much does gate repair cost in Arlington?

Most residential gate repairs in Arlington cost $175 to $650, with typical jobs landing around $250 to $400. Mechanical fixes sit at the low end and electric or automated repairs sit higher. The written estimate sets the final price – call (855) 349-3550 for a free quote.

Is it cheaper to repair or replace a gate?

Repair is usually cheaper in the short term when the fault is a single part – a hinge, a sensor, a receiver, or a roller. Replacement tends to be the better value when the operator or gate is at the end of its life and repairs start stacking up. A repair ranges from $175 to $650; a full automated system install runs $1,800 to $5,500 or more. We’ll tell you honestly which applies during the free estimate. Call (855) 349-3550.

How much does electric gate repair cost in Arlington?

Electric and automated gate repair in Arlington typically costs $250 to $800, depending on whether the fault is in the access hardware, safety sensors, control board, or motor. Commercial operators run higher. Call (855) 349-3550 for an exact quote – estimates are free.

Can you come today?

Often, yes – same-day repair is frequently possible when you call early. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Call (855) 349-3550 and we’ll get you on the schedule.

Do you work on my gate operator brand?

Yes. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, spanning residential openers to heavy-duty commercial systems. If you don’t know your brand, we’ll identify it on-site. Call (855) 349-3550 for a free estimate.

Is the estimate really free?

Yes. The estimate is free and the price is set per job by the written estimate, so there’s no service-call fee added to the figure. What you see on the written estimate is what you pay. Call (855) 349-3550.

Get Your Free Gate Repair Estimate

Whether your gate is a manual driveway swing gate, an aging Mighty Mule operator, or a DoorKing commercial entrance that’s acting up, the fastest way to a real number is to call. We’ll diagnose the actual system, give you a written estimate, and tell you plainly whether repair or replacement makes more sense. Call (855) 349-3550 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Closed Saturday.

Pricing reflects the Arlington market as of 2026. Arlington Gate Service offers free estimates – call (855) 349-3550.

Written by the team at Arlington Gate Service.