Farm & ranch
Wrought iron
Wood & steel frame
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Long Branch, VA
Gate Installation in Long Branch starts with a simple question: will a new gate work with the lot you actually have? Most of the community sits on quarter-acre parcels laid out after the war, and the property line, the driveway pitch and the existing fence often decide the design before a single hinge is chosen. We’re a gate-only company, so the work is measured, specified and priced for your driveway rather than pulled off a shelf. Our technicians have up to 10 years of experience with systems from Mighty Mule, LiftMaster, FAAC and Elite. Call (855) 349-3550 to set up a free on-site estimate.
Why Long Branch Homes Are Different
Long Branch is unincorporated Fairfax County, which shapes gate work here more than most homeowners expect. There’s no municipal building department in the community itself. Gate permits and driveway or entry gate approvals run through Fairfax County’s permitting process, so a repair that only touches hardware and a replacement that changes the opening are handled very differently. Add HOA rules on top and you’ll want to know what applies before the work starts, not after.
The housing mix explains the rest of it. Most lots hold post-WWII to 1960s brick and siding single-family homes on quarter-acre parcels, with scattered infill construction replacing teardowns. Older lots usually have original wood or early metal driveway and walkway gates, and those tend to need hinge, latch and post repairs rather than a full replacement. The newer builds along the Long Branch stream corridor are more likely to go straight to a modern metal entry gate on automation.
Northern Virginia’s humid subtropical climate does the rest. Freeze-thaw cycles in winter heave gate posts and shift hinges, and summer humidity swells wooden gates and rusts untreated steel hardware. That combination is why the same driveways come up again every spring.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Long Branch Services
Two jobs come up most often when Long Branch homeowners call: getting an existing gate working again, and getting power and control into a gate that never had them.
Gate Repair in Long Branch
Wooden driveway gates on the older colonial lots tend to bind each spring after winter frost heaves the posts. If that’s what’s happening at your property, the fix isn’t only a hinge adjustment. We check the post footing, the frame and the latch alignment together, because resetting a post is often the actual repair. Sagging walkway gates, sticking latches and dropped hinges on mid-century lots all get the same inspection before anyone touches a wrench. Our technicians have up to 10 years of experience across the operator brands found on this street stock. If your gate needs more than an adjustment, Gate Repair in Long Branch covers the full picture.

Electric Gate Repair in Long Branch
A gate that opens halfway and stops, reverses on nothing, or ignores the remote usually points to something upstream of the mechanical parts: a limit setting, a safety sensor knocked out of line, or a control board that took a humidity-driven failure. Automated gates are their own diagnostic job, and that’s most of what we do. We work on LiftMaster and Elite operators regularly, and on residential-grade units like Mighty Mule that were installed when a rebuild went up. Power runs and sensor alignment get checked as part of the diagnosis, not as an afterthought. For the full scope, see Electric Gate Repair in Long Branch.

Gate Installation in Long Branch
Long Branch is a community where the gates and the houses were often built decades apart, and that gap is what makes new installation here a design job rather than a purchase. Quarter-acre lots from the post-WWII and 1960s era carry original wood or early metal gates that were sized for a narrower vehicle and a manual swing, while the newer infill homes along the Long Branch stream corridor are set up for a modern metal entry gate on an operator. We handle Gate Installation for both, and we measure the opening, the swing clearance and the power source before anything is ordered.
Then there’s Fairfax County. Because Long Branch has no municipal building department of its own, gate permits and driveway or entry gate approvals go through the county process, and HOA rules stack on top. We’d rather sort that out at the estimate stage than discover it mid-build. The other local factor is ground movement: freeze-thaw cycles in winter heave gate posts, so a new gate here is only as good as its footings. Posts go to proper footing depth for the gate’s weight and swing, and we dig for that rather than reusing whatever hole was there.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car in the rain, or the gate has become a two-person job for anyone leaving the driveway.
What it costs in Long Branch
An automatic gate installation typically runs $3,500 to $9,000 in Long Branch, depending on the operator class, gate weight and how far the power has to travel.
How we do it
We measure the opening and swing, confirm the power route, specify an operator matched to the gate’s weight and duty cycle, set the posts to proper footing depth, hang the gate and then set the limits and test the safety edges before we leave.
Driveway Gate Installation
Signs you need it
The existing driveway gate is racked, dragged on the ground for more than a season, or the posts have moved enough that no hinge adjustment holds it straight.
What it costs in Long Branch
A driveway gate installation typically costs $2,200 to $6,500 in Long Branch, with wood at the lower end and metal or ornamental designs higher.
How we do it
We lay out the opening against the property line and the driveway pitch, check county setback requirements, set new posts to proper footing depth, hang the gate and confirm the latch and stop points line up through a full swing.
What Gate Installation Costs in Long Branch
| Item | Typical range in Long Branch |
|---|---|
| Automatic gate installation | $3,500 – $9,000 |
| Driveway gate installation | $2,200 – $6,500 |
| Manual gate installation (no operator) | $1,200 – $3,800 |
Do I need a permit for a new gate in Long Branch?
Often yes. Long Branch is unincorporated Fairfax County, so gate permits and driveway or entry gate approvals go through the county rather than a town office, and HOA rules may apply too. Ask before ordering materials, and we’ll walk through what your project needs at the estimate.
Can a new gate be installed on an older Long Branch lot?
Yes, and it’s common. Mid-century lots usually need new posts set to proper footing depth rather than a reuse of the originals, since winter freeze-thaw has often moved them. We check the footing before specifying the gate, so the new one hangs true.
Brands We Service in Long Branch
We work on your brand, not a generic version of it. Our technicians diagnose systems from LiftMaster, FAAC, Mighty Mule and Elite, and we’re familiar with nine major gate operator brands in all, from light residential openers to heavy commercial units. We don’t claim to stock parts locally; what we do is identify the exact model on-site so the right component gets ordered once. See our brands for the full roster.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Long Branch, VA
| Service | Typical range in Long Branch |
|---|---|
| Automatic gate installation | $3,500 – $9,000 |
| Driveway gate installation | $2,200 – $6,500 |
| Manual gate installation | $1,200 – $3,800 |
In Long Branch, the two things that move a gate installation quote most are the ground and the power. Posts that have to go deeper because of years of freeze-thaw, and a long run from the panel to the operator, both add labor before any hardware is chosen. Those are estimates, not quotes; the written estimate sets the final price, and we agree it with you before any work starts. Call (855) 349-3550 for a free on-site estimate.
Neighborhoods We Serve in Long Branch
We work across the Long Branch community and the surrounding Fairfax County blocks, including the older colonial streets, the infill rebuilds along the Long Branch stream corridor, and the small commercial frontages that run through the area. Gate work here doesn’t cluster by neighborhood the way it does in newer subdivisions; the older quarter-acre lots and the rebuilds sit close together, and both call for the same on-site look before we quote. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and a call outside dispatch hours is booked into the next opening.
- The older colonial streets off the Long Branch corridor
- Infill rebuilds along the stream corridor
- Small commercial and multi-unit frontages in the community
Service Area – Cities Near Long Branch
Long Branch sits inside a run of Fairfax County communities we cover, so a job near the edge of the community is no different from one in the middle of it. If you’re in George Mason, VA, Burke Centre, VA, Wakefield, VA or Braddock, VA, the same county permitting realities and the same freeze-thaw ground conditions apply, and we handle gate installation and repair across all of them. Call (855) 349-3550 to confirm your address and set an estimate.
Serving Long Branch, VA – Our Local Coverage Area
We serve Long Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Long Branch
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Installation work is scheduled after the on-site measure, since gates and operators are specified and ordered for your opening.
It depends on what changes. Hardware and hinge repairs generally don’t need a permit, while a new gate or a changed opening often does, since Long Branch has no municipal building department and approvals run through Fairfax County. HOA rules may also apply, so check both before ordering.
We cover the whole Long Branch community, from the older colonial lots to the infill rebuilds along the stream corridor, plus the small commercial frontages in between. Neighboring Fairfax County communities are covered on the same basis. Call (855) 349-3550 with your address and we’ll confirm.
Whether your gate needs reset posts, a new operator or a full replacement, the first step is the same: a free on-site estimate with a written price you agree to before any work starts. Call (855) 349-3550. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Long Branch Customers Say
"Second time using them. Same guy, same good work."
- Imani Coleman"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Craig Whitaker"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Katie Hoffman