Gate Repair in Arlington - Fixed Today, No Surprise Invoice

Trusted Gate Repair for Arlington Homeowners

A gate that won’t open, drags on the ground, or stops halfway is a problem you want solved correctly the first time. We focus only on gates, so when we arrive at a home in Arlington, the failure is diagnosed against the system actually installed, not guessed at. Our technicians have up to 10 years of experience, and they work on nine operator brands, from Mighty Mule and Ghost Controls on residential driveways to FAAC, BFT, DoorKing, and Viking on heavier systems. That matters when the fault is a motor, a control board, a safety sensor, or the hardware itself.

Call (855) 349-3550

We handle both repair and new installation, so a gate that’s past saving doesn’t send you looking for a second vendor. Same-day service is often possible in Arlington, and we answer the phone whenever you call. Call (855) 349-3550. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Whether you’re a homeowner, a property manager, or a small business owner in Arlington, the price is quoted and agreed before any work starts. You’ll know what’s being fixed and what it costs before a single bolt is turned. For a closer look at what we cover, see Arlington Gate Service.

Driveway Gate Repair

Driveway Gate Repair covers the swing or slide gate that controls vehicle access to your home, and it’s the job we’re called for most in Arlington. You need it when the gate opens unevenly, hangs low and scrapes, won’t latch, or the motor runs but the gate doesn’t move. We inspect the hinges, the track or the operator arm, the control board, and the safety sensors together, because a driveway gate failure is often two problems wearing one symptom. A typical driveway gate repair in Arlington runs $150-$450 depending on the fault and the parts.

Diagnosing the Mechanism and Operator

We test the gate by hand first to separate a mechanical bind from an electrical fault. If the leaf moves freely by hand, the problem is usually in the motor or board. If it binds, the issue is in the hardware, and forcing the motor only damages it further.

Repairing the Swing and Slide Hardware

Hinges, rollers, guide posts, and latches take the daily load, and they wear unevenly. We replace what’s failed and adjust what’s still serviceable, so the gate tracks true through its whole travel. The estimate covers parts and labor together, agreed before we begin.

Gate Welding

Gate Welding is the structural repair that keeps a heavy gate from failing completely, and in Arlington you need it when a hinge plate has torn, a post has rusted through, or a frame has cracked at a joint. We weld on site where the joint allows: hinge brackets, post plates, frame corners, and stops. We also replace sections that are too far gone to weld safely. A typical welding repair in Arlington runs $200-$600 depending on how much structure needs rebuilding and whether the gate has to come off its hinges.

Structural Joints and Hinge Plates

Hinge plates and frame corners carry the weight of the whole leaf, and that’s where cracks start. We grind the break back to sound metal before welding, so the repair holds. A weld over rust or paint is a short-term fix at best.

Post Repair and Re-Anchoring

A leaning post puts every other part of the gate under strain. We assess whether the post can be re-anchored at proper footing depth or needs replacement. Getting the post right is what keeps the gate swinging correctly afterward.

Commercial Gate Repair

Commercial Gate Repair covers the heavier, higher-cycle systems you find at apartment entries, parking structures, and business lots in Arlington, and it needs a different approach from residential work. You need it when an access gate cycles constantly, jams under load, or the access control stops reading credentials. We service commercial operators from DoorKing and FAAC, along with the control boards, loop detectors, and access hardware that get subcontracted on general jobs. A typical commercial gate repair in Arlington runs $350-$900 depending on the operator class and the parts involved.

High-Cycle Operator Diagnosis

Commercial operators log faults differently, and reading those codes saves guesswork. We check the motor, the board, and the safety devices as one system, because a stuck loop detector can read as a motor failure. That’s how a repeat visit gets avoided.

Access Control and Safety Devices

Keypads, card readers, and vehicle detectors fail in ways that look like gate problems. We test the access chain end to end. Safety edges and reverse loops get checked on every commercial visit.

Iron Gate Repair

Iron Gate Repair handles the cast and fabricated iron gates that are common on older Arlington properties, and it’s the work of restoring rather than replacing. You need it when an iron gate has rusted joints, a bent bar, a failing hinge, or a finish breaking down. We repair the structure, straighten bent sections, and treat rust before it spreads. A typical iron gate repair in Arlington runs $180-$550 depending on the extent of the corrosion and the hinge or joint work needed.

Rust Treatment and Wire Brushing

Surface rust and deep rust are different problems. We clean back to bare metal to see how far it’s gone. Treating it now is far cheaper than rebuilding a frame later.

Straightening Bent Bars and Frames

Impact damage rarely bends just one bar. We check the whole frame for distortion before straightening. A gate that’s true to its frame closes and latches without force.

Sliding Gate Repair

Sliding Gate Repair covers gates that ride on a track or cantilever rather than swinging, and it’s the most track-sensitive work we do in Arlington. You need it when the gate jumps the track, grinds, stalls partway, or the rollers have flattened. We inspect the track, the rollers, the guide posts, and the operator together. A typical sliding gate repair in Arlington runs $150-$500 depending on track condition and roller or operator parts.

Track Alignment and Roller Replacement

A gate that comes off the track is a real hazard, and it usually means the track or a roller has shifted. We assess the alignment before replacing hardware. Rollers that have flat-spotted get changed before they chew the track.

Cantilever and Operator Adjustment

Cantilever gates carry load through a counterbalance, and that’s where a stall often starts. We check the balance and limit settings. The operator’s end limits get set so the gate stops where it should.

Wrought Iron Gate Repair

Wrought Iron Gate Repair covers decorative ironwork where appearance matters as much as function, and it’s common on established Arlington homes and HOAs. You need it when the gate sags, the finish has failed, or a decorative element has broken. We match the repair to the existing ironwork so the fix doesn’t stand out. A typical wrought iron gate repair in Arlington runs $200-$600 depending on detail work and re-finishing.

Matching Decorative Elements

Scrollwork and finials are the hardest parts to repair invisibly. We evaluate whether the piece can be repaired or needs to be re-fabricated to match. The goal is a gate that looks like it was never touched.

Sag, Hinge, and Finish Work

A wrought iron gate that sags usually has a hinge or a post issue below the surface. We address the cause. Finish repair follows the structural fix, never the other way around.

Metal Gate Repair

Metal Gate Repair covers steel and aluminum gates that don’t fall neatly into the iron or wrought iron category, and it’s the broadest repair class we handle in Arlington. You need it when a steel frame has cracked, aluminum has bent, or hardware has pulled loose. We identify the metal first, because steel and aluminum need different repair approaches. A typical metal gate repair in Arlington runs $150-$500 depending on the metal and the damage.

Steel and Aluminum Assessment

Aluminum bends and tears differently from steel, and welding them is not the same job. We match the repair method to the material. That’s what stops a repair from failing at the same joint again.

Hardware Re-Fitting and Rust Control

Fasteners and hinge plates pull out of thin metal over time. We re-fit hardware with the right backing. Rust gets treated at the source before it undermines the repair.

Wood Gate Repair

Wood Gate Repair handles timber gates where moisture, sag, and joint failure are the usual problems, and it’s steady work in Arlington’s older neighborhoods. You need it when the gate has swollen, sagged, rotted at a joint, or stopped latching. We repair the failing section and check the frame and hinges with it. A typical wood gate repair in Arlington runs $150-$450 depending on the rot and hardware work.

Rot, Swelling, and Joint Repair

Wood moves with the seasons, and a gate that swelled in wet weather may bind in dry weather. We repair rot before it reaches the frame. Joints get re-fitted so the gate keeps its shape.

Sag Correction and Hinge Re-Setting

A sagging wood gate is almost always a hinge or post problem, not the gate itself. We correct the cause. The gate gets its swing back without adding weight it can’t carry.

Brands We Service

We service the operator brands you’re most likely to find on an Arlington gate. FAAC systems show up on heavier residential and commercial gates, and their control boards and limit settings are where we see most faults. BFT operators are common on automated driveways, and we know their safety-device wiring and how it fails. Linear and Viking units appear on a lot of residential installs, and each has its own tell when a motor or board starts to go.

We also work on LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment across residential and commercial properties. The point isn’t the list; it’s that we diagnose the brand actually on your gate instead of applying a one-size-fits-all fix. Whether you have FAAC, BFT, Linear, or any other make, we can help.

Signs You Need a Pro Right Now

• The gate won’t reverse when it meets an obstacle. A failed safety device can let a heavy gate close on a person or vehicle. Stop using the operator until it’s tested and repaired.
• The gate has come off its track or hinge. A sliding gate off its track can fall, and a swing gate hanging by one hinge can fail completely. Don’t force it back into place.
• The operator runs but the gate doesn’t move. That usually points to a stripped gear, a failed arm, or a board fault. Continued use can turn a repair into a replacement.
• You see sparking, burning smell, or tripped breakers at the operator. This is an electrical fault, and it’s not a DIY job. Shut the power off at the breaker and call a trained professional.
• The gate moves in jerks or stops partway. Bind, wear, or a limit setting out of adjustment will keep damaging parts until it’s corrected. It’s cheaper to fix now than after the motor fails.

Our Process, Step by Step

1. 1
   Call and describe the fault. Tell us the gate type, the operator brand if you know it, and what it’s doing. That gets the right technician and the right diagnostic path onto the job. Call (855) 349-3550. We answer 24/7.
2. 2
   On-site diagnosis. We test the gate by hand, then the operator and its control board, and check the safety devices. We read the fault codes where the operator logs them. This is where a misdiagnosis gets caught before money is spent.
3. 3
   Written estimate before work. You get the findings, the recommended repair, and a written price. Nothing starts until you agree to it. If the gate needs replacement instead of repair, we tell you that plainly.
4. 4
   Repair and re-test. We complete the repair, then test the gate through its full cycle, including the safety reverse. We don’t leave until the gate does what it should.
5. 5
   Walk-through and handoff. We show you what was fixed and what to watch for. If the operator settings need adjustment over time, you’ll know what to look for before it becomes a call.

How Much Does Gate Repair Cost in Arlington?

Our Service Area Near Arlington

We work across Arlington and the surrounding communities, including Bailey’s Crossroads, Tysons, Ravensworth, Kingstowne, Wakefield, Hayfield, Kings Park, Long Branch, George Mason, Newington Forest, and Burke Centre. Dispatch runs from 7am to 7pm, Sunday through Friday, and same-day service is often possible. If you’re outside Arlington, call and we’ll confirm coverage for your area. For nearby work, see our gate repair page and our gate repair page for Tysons.

Frequently Asked Questions About Gate Repair in Arlington

Schedule Your Gate Repair Service in Arlington Today

A gate that’s binding, off its track, or not reversing is only getting worse with use. Call (855) 349-3550 to book a free estimate in Arlington. We diagnose the brand on your gate, quote the price before work starts, and handle residential and commercial systems alike. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. No-obligation estimate, and a straight answer on whether to repair or replace.

Written by the team at Arlington Gate Service.