Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in George Mason, VA
If you’re adding a gate to a George Mason driveway or replacing one the HOA has finally flagged, you’re in the right place. Most lots here are brick-front colonials and townhome clusters from the 1980s through the 2000s, and the gates that came with them are builder-grade ornamental aluminum and steel that have been through decades of Virginia freeze-thaw. Installing new means matching the subdivision’s architectural standard, not just buying a gate. We’re gate specialists: installation, repair, and the electric systems that drive them. Call (855) 349-3550 for a free on-site estimate.
Why George Mason Homes Are Different
George Mason is an unincorporated Fairfax County community, and the housing that defines it shapes the work. Planned subdivisions and HOA-governed townhome and single-family clusters make up most of the housing stock, which means gate work here is as much a compliance exercise as a mechanical one. A driveway gate, a privacy gate, or a community entry gate has to match architectural standards before anyone touches a hinge.
The physical conditions add to it. Northern Virginia’s humid summers and repeated winter freeze-thaw cycles cause hinge binding, wood swelling, and post heaving. Summer thunderstorms and occasional heavy snow loads stress automated openers and latches on top of that. So a gate that was installed correctly a decade ago can sag or stall now without anything being wrong with the operator itself.
The distinctive part is the review board. HOA architectural review boards in George Mason subdivisions frequently reject mismatched replacement gates, so the exact color, height, and style have to be documented before a gate gets swapped. A replacement that passes inspection in a neighboring jurisdiction can fail the HOA here. We plan for that on every install.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main George Mason Services
New gate installation and the repair of existing gates and their operators cover almost every call we get in George Mason, whether it’s a homeowner replacing a sagging driveway gate or a property manager sorting out a community entry system.
Gate Repair in George Mason
Repair work in George Mason usually starts with the same culprits: hinge binding from years of freeze-thaw, fastener corrosion on builder-grade ornamental metal, and posts that have heaved enough to throw a gate out of square. Wooden privacy gates swell in the humid summers and stick against their latches. We look at the frame, the hinges, the posts, and the operator together, because fixing a hinge without addressing a bent post just moves the problem down the gate. For a closer look at how we handle Gate Repair in George Mason, including what’s involved for HOA-regulated gates, that page covers it.
Electric Gate Repair in George Mason
Automated gates fail differently depending on the operator. A residential-grade unit on a townhome driveway behaves nothing like a commercial system at a community entrance. We diagnose the actual brand on site, whether that’s a BFT control board, a Linear receiver, or a Viking motor, rather than swapping parts and hoping. Storm load and repeated freeze-thaw are common triggers for sensor faults and stuck limits here. More detail on motors, control boards, and safety sensors is on our Electric Gate Repair in George Mason page.
Gate Installation in George Mason
Gate installation in George Mason is a design-review job before it’s a construction job. The housing stock here is dominated by 1980s to 2000s brick-front colonials and townhome clusters, and the original builder-grade ornamental aluminum and steel driveway gates are showing their age across the community. When a gate gets replaced rather than repaired, the new one has to match the subdivision’s architectural standard in color, height, and style, and it has to survive Northern Virginia’s humid summers and repeated winter freeze-thaw without post heaving or hinge binding. We measure, document, and specify the gate against those constraints before we order anything. Full details of our process and product range are on our Gate Installation page.
Because George Mason is unincorporated Fairfax County, permits go through the county, and your HOA review runs in parallel. We tell you up front what documentation your board is likely to ask for.
Driveway Gate Installation
A driveway gate on a George Mason colonial or townhome lot has to clear the property line, the slope of the drive, and the HOA standard all at once. Most of the driveways here are short and slightly graded, which affects swing clearance and the footing depth for each post.
Signs you need it
Your existing driveway gate has rusted through at the fasteners, has heaved posts that no longer line up, or the HOA has flagged it as non-compliant with the subdivision standard.
What it costs in George Mason
Driveway gate installation typically runs in the range shown in the pricing table below, with the final number set by a written estimate after we’ve measured the opening and confirmed the HOA spec.
How we do it
We measure the opening and slope, document color, height, and style for the architectural review, confirm the county permit path, then set posts to proper footing depth and hang the gate square before any operator goes on.
Sliding Gate Installation
Sliding gates work well where a swing would foul a driveway or a pedestrian path, and they’re common on community entrances and longer driveways around George Mason. The track and the footing are the parts that decide whether it runs smoothly for years.
Signs you need it
Your swing gate has no room to open, or an existing slide gate has jumped its track and worn the rollers past adjustment.
What it costs in George Mason
Sliding gate installation falls within the same typical ranges shown in the pricing table, and the written estimate after measurement sets the final figure.
How we do it
We survey the run and the ground, set a level track on a proper footing, hang the gate to roll freely by hand, then add the operator and safety edges only once the mechanical side is right.
What Gate Installation Costs in George Mason
| Item | Typical range in George Mason |
|---|---|
| Driveway gate installation | $1,800 – $4,500 |
| Sliding gate installation | $2,200 – $5,500 |
| Automatic gate operator added to a new gate | $1,200 – $3,200 |
Will my HOA approve the gate you install?
We document exact color, height, and style to match your subdivision’s architectural standard before ordering, so the replacement submitted to the review board matches what gets built. Approval is your board’s call, but we give you the spec they’ll ask for. Call (855) 349-3550 for a free on-site estimate.
How long does a gate installation take in George Mason?
Most residential driveway and sliding gate installations take one to two days once the gate is ordered and the HOA and county sign-offs are in hand. The measure and documentation come first, so the schedule depends on review timing rather than the build. Call (855) 349-3550 to start with a free measure.
Brands We Service in George Mason
We work on the operators homeowners here actually have: BFT, Linear, Viking, and Ghost Controls, among a wider roster of residential and commercial brands. We don’t claim to stock parts locally; we diagnose the brand on site and source what’s needed. That keeps turnaround predictable. You can see the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in George Mason, VA
| Service | Typical range in George Mason |
|---|---|
| Gate repair (hinges, latches, alignment) | $150 – $600 |
| Electric gate repair (motor, control board, sensors) | $200 – $850 |
| Driveway gate installation | $1,800 – $4,500 |
| Sliding gate installation | $2,200 – $5,500 |
| Automatic gate operator added to a new gate | $1,200 – $3,200 |
| Post reset or footing repair | $250 – $900 |
| Safety sensor or safety edge replacement | $180 – $450 |
| Access control or keypad installation | $350 – $1,100 |
What pushes the price up in George Mason is mostly the site and the spec: a gate that has to match a strict HOA architectural standard, heavy or custom ornamental metal, or a post that needs a full reset because freeze-thaw has heaved it out of line. The written estimate sets the final price, and we quote and agree it before any work starts, so there’s no invoice surprise at the end.
Neighborhoods We Serve in George Mason
We work across the planned subdivisions and townhome clusters that make up George Mason, from older 1980s brick-front colonials with original ornamental gates to newer clusters where the community entry gate needs operator work. Because so much of the housing is HOA-governed, we plan review documentation into every job. Fast dispatch from 7am to 7pm, Sunday through Friday, covers the whole community.
- George Mason townhome clusters
- Brick-front colonial subdivisions
- Community entry gate systems
- HOA-governed single-family neighborhoods
Service Area – Cities Near George Mason
George Mason sits in the middle of a cluster of Fairfax County communities we cover, and the same freeze-thaw and HOA realities carry across the boundary. If you’re just outside the community, we can still help. Alongside George Mason itself, we work in Long Branch, VA, Burke Centre, VA, Wakefield, VA, and Braddock, VA.
Serving George Mason, VA – Our Local Coverage Area
We serve George Mason and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in George Mason
We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician to George Mason, with same-day service when the schedule allows. Call (855) 349-3550 to book.
Most gate installations in George Mason need a county permit, and HOA-governed subdivisions also need architectural review approval. We document color, height, and style for the board and can point you to the county’s permit process. The estimate covers what’s required.
Yes. We serve the planned subdivisions, townhome clusters, and community entry systems across George Mason, plus the nearby Fairfax County communities. If you’re unsure whether your address is covered, call (855) 349-3550 and we’ll confirm.
Whether you need a new gate measured and specified to your HOA’s standard, or a failing operator diagnosed by someone who knows the brand, we’re the gate specialist to call in George Mason. We work on BFT, Linear, Viking, Ghost Controls, and more, from residential openers to commercial systems. Gate repair, electric gate repair, and installation under one roof means you don’t need a second vendor. Our technicians have up to 10 years of experience. Call (855) 349-3550 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What George Mason Customers Say
"Second time using them. Same guy, same good work."
- Imani Coleman"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Craig Whitaker"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Katie Hoffman